Integrated Laser i104 L-G | Sic Marking

Integrated Laser i104 L-G




2D datamatrix code


Bar code


QR Code

The i104L-G laser marker was engineered for seamless integration into industrial production lines. Thanks to its superior quality marking and high work pace level, the i104L-G enhances traceability and identification processes with very low operating and maintenance costs. 

The i104L-G is a integrated marking system capable of marking on a range of materials including steel, titanium alloys, and most plastics. It will mark alphanumeric, 1D bar codes, 2D Data matric codes, graphics, and complex logos, all with a high level of precision and contrast. The compact dimensions of the marking head simplify integration. Control of the laser head can be achieved through the Fiber Unit Controller, or with a PLC interface.  

Mechanic features

Marking Window:

100x100 (210 x 210 mm in option)

Focal Distance:

160 mm

Weight of Controller:

19 kg

Weight of Marking Head:

5 kg


Class 4


Standalone Mode (without PC)

Electronic features

The i104 l-g fiber laser marking solution has been designed to operate with the rack-controller Fiber Unit. 


Pulsed Ytterbium Fiber Laser

Operation Mode:

Pulsed (20 to 500kHz)


1064 nm

Optical Fiber Length:


Average Power:

10W, 20W, or 50W

Peak Power:

10 kw


Built-In Laser Pointer


Air-Cooled Only

Steering software

i104 L-G laser marking equipemnt operates on standalone mode, connected to the production PLC. The creation and modification of files can be done from any PC with a Windows OS using the SIC Laser Advanced software. A full range of customizable parameters are available which allow the user to, among other things, optimize cycle time and improve contrast and colors by changing the speed, frequency, and power settings. 


Advanced Protocol

Standalone Mode

Basic I/O for Cycle Management

File Selection by I/O



Vacuum apparatus to extract fumes & small particles produced by laser marking applications. Delivered complete with a pre-filter, a submicron particle high efficiency filter & a carbon filter.


  • Respect of environmental standards
  • Compliance with workplace legislation
  • Prevents fouling of the marking lens

Device dimensions: 365x501x740mm


The digital Z axis allows the marking head to access difficult areas or mark on several levels in one cycle. Available in various sizes.

  • 50-250 mm Z axis for integrated product range

Equipment needed
Third axis board integrated into the e10 controller. Powers and controls the digital Z axis.

Interchangeable axis
Used on all SIC Marking dot peen & light-duty scribing systems with minimal adaptation. 


  •  Sturdy design based on stepper motors and lead screw
  •  Makes use of two industrial grade guiding rails
  •  Dedicated adapter plate to fit all marking heads
  •  Driven by third axis board integrated to the e10 controller
  •  Only one connection required: to e10 controller
  •  Advance speed : 30mm/s 


  • Part markings on different levels in same operation
  • Can avoid obstacles in the marking area
  • Allows displacement marking head for part removal
  • Compact and easy to integrate, reducing integration costs
  • Movement is controlled through e10 marking file, which avoids requirement for an external controller


SIC Marking offers an optional 3D marking function for its integrated laser range and marking stations. This function allows to vary the laser beam’s focal length in order to mark on different levels.

With this option, it is possible to perform laser marking on one part at two different height levels or parts of different heights in the same production series. Thanks to the 3D marking option, laser marking on parts with collars, hollow, inclined or rounded surfaces and at different heights is made possible. Height compensation is important and can be up to 80 mm.

Our laser marking head with 3D marking option remains very easy to integrate on all production lines. It is one of the most compact on the market and does not require any maintenance. The adjustment of the working distance is done by software and the head does not move to change the marking area.

The 3D marking option can be added at any time depending on our customer's marking needs.